/ˈpoudərˌkōt/

       

verb

                                 

cover (an object) with a polyester or epoxy powder, which is then heated to fuse into a protective layer.

Powder coating is a process that uses electricity to apply a colored powder, to a conductive surface. The special spray gun charges the powder which is attracted to the part, because it has been grounded. The part is then moved into a large oven and baked on. Typically, about 30mins until it comes out and cools.

  

Although powder coating is not indestructable, it is much more durable than paint. Powder is more resistant to rust, chipping, scratches and much better for the environment.

Two-Stage Process

There are thousands of colors to choose from. Some colors require multiple stages (coats and time in the oven). Most silvers, require a clear coat. So that is considered a 2-stage process. 

Candy colors require a base coat, usually a bright silver/chrome like finish. Once the base coat has been applied and gone through its bake cycle, the candy color(Transparent) can be applied of the shiny surface, creating the candy effect.

Dormant colors are similar to candy colors, but the base coat will be the color. A clear coat is than applied to activate the candy effect.

Zinc Primer is a very popular base coat, expecially near the coast. Unlike the 2-stage process for the candy colors, This is applied as extra durability in weathered conditions and increased chemical resistance for an excellent long lasting product.

*under construction*